CA.5011
Out of stock
Description
The C.A 5011 TRMS multimeter gives the RMS value whatever the type of signal (sinusoidal or distorted). This makes it ideal for all types of installations, even those involving “non-linear” loads.
Specifications:
- Automatic recognition of AC/DC
- AC/DC voltage: 400 mV to 600 V (5 ranges)
- Operating frequency: 20 Hz to 10 kHz
- Typical accuracy: 0.5% – Impedance: 10 MΩ
- AC/DC current: 400 µA to 10 A (6 ranges)
- Resistance: 400 Ω to 40M Ω (6 ranges)
- Continuity test: (R < 400 Ω) and diode test
- Frequency: 4 kHz to 400 kHz (3 ranges)
- Reading of dB scale from -20 to 16 dB
- Fuse status LED
- “Voltest” LED if a voltage is present in ohmmeter and continuity modes
- Max and Hold functions
- Can be used as a zero galvanometer
- Backlighting
- Dimensions: 160 x 105 x 56 mm
- Weight: 500g
- Use on any installation rated lower than or equal to CAT III 600 V as per IEC/EN 61010-1 Edition 2
Compare
Related products
-
Digital Multimeters, Electrical, Universal Testing and Safety
CA.5003
Description
The C.A 5003 is a very competitively-priced analogue multimeter designed to meet all the needs of electricians.
Specifications:
- DC voltage: 100 mV to 600 V (8 ranges)
- AC voltage: 10 V to 600 V (5 ranges)
- DC current: 50 µA to 15 A (7 ranges)
- AC current: 1.5 mA to 15 A (5 ranges)
- Automatic calibration
- “Voltest” LED if voltage present in ohmmeter mode
- Typical accuracy: 1.5%
- Impedance: 20 kΩ/V
- Resistance: 10 kΩ and 1 MΩ
- Audible continuity test: R < 50 Ω
- dB scale (AC voltages)
- Fuse status LED
- Dimensions: 160 x 105 x 56 mm
- Weight: 500 g
- IP53
- Use on any installation rated lower than or equal to CAT III 600 V as per IEC/EN 61010-1 Edition 2
SKU: n/a -
Digital Multimeters, Electrical, Universal Testing and Safety
C.A 5233
Description
This compact, comprehensive digital multimeter is equipped with all the functions required by electricians for maintenance of low and medium-power residential and tertiary equipment and installations. Ergonomic and simple to use, it is exceptionally easy to read with its 6,000-count backlit display with bargraph, 2 “Off” positions for greater effectiveness and a compact casing with a non-slip protective coating for excellent handling.
- CAT IV 600V
- TRMS measurements
- Large 6,000-count backlit display (digits 8 mm high)
- 61-segment bargraph
- Double OFF position
- No-contact voltage detection (NCV)
- VLow Zlow-impedance voltage measurement to avoid stray voltages.
- Min, MAX and RELative functions
- Measurement up to 600 V
- AC or DC current measurement up to 10 A
- Frequency measurement
- Temperature measurement
- Capacitance measurement
- 60 mV range
- Compact IP54 casing with built-in shockproof protection
- Compatible with the multi-function mounting accessory
SKU: n/a -
Digital Clamp Meters, Electrical, Universal Testing and Safety
F 603
With protection against electric shocks up to 12 kV, the F600 Series fulfils the most demanding safety criteria (CAT IV 1,000 V) and offers a high protection rating allowing users to work in total safety on all LV installations.
The F600 Series is ideal for high-power applications such as electrical power distribution, chemical and petrochemical industries, metallurgy, rail transport, etc.
Equipped with a fast 12-bit TRMS digital acquisition system, F603 clamps offer particularly accurate measurements whatever the signal’s waveform.SKU: n/a
