Digital Multimeters
Showing all 10 results
-
Digital Multimeters, Electrical, Universal Testing and Safety
C.A 5001
Description
The C.A 5001 is a very competitively-priced analogue multimeter designed to meet all the needs of electricians.
Specifications:
- DC voltage: 100 mV to 600 V (8 ranges)
- Accuracy: 1.5% except with 100 mV range (2.5%)
- AC voltage: 10 V to 600 V (5 ranges)
Bandwidth: [20Hz-100kHz] on 10 V range, [20Hz-1kHz] on 300 V and 1,000 V ranges
Accuracy: 2.5% except with 100 mV range (3%) - Impedance: 20 kΩ/V
- DC current: 50 µA to 5 A (5 ranges)
- AC current: 5 mA to 5 A (4 ranges)
Bandwidth: [40 Hz-5 kHz]
Accuracy: 2.5% except with 5 A range(5%) - Resistance: 10 kΩ and 1 MΩ
- Audible continuity test: R < 50 Ω
- dB scale (V AC).
- Fuse status LED
- Dimensions: 160 x 105 x 56 mm
- Weight: 500 g
- Use on any installation rated lower than or equal to CAT III 600 V as per IEC/EN 61010-1 Edition 2
SKU: n/a -
Digital Multimeters, Electrical, Universal Testing and Safety
C.A 5231
This compact digital multimeter meets the needs of any self-employed electrician.
It is simple to use and exceptionally easy to read thanks to its 6,000-count backlit display with bargraph.
There are two “Off” positions for greater effectiveness, including one which allows no-contact voltage detection. The screen lights up when near to a live cable.
If it is hooked up to a current clamp, it can measure currents up to 600 A in total safety.
SKU: n/a -
Digital Multimeters, Electrical, Universal Testing and Safety
C.A 5233
Description
This compact, comprehensive digital multimeter is equipped with all the functions required by electricians for maintenance of low and medium-power residential and tertiary equipment and installations. Ergonomic and simple to use, it is exceptionally easy to read with its 6,000-count backlit display with bargraph, 2 “Off” positions for greater effectiveness and a compact casing with a non-slip protective coating for excellent handling.
- CAT IV 600V
- TRMS measurements
- Large 6,000-count backlit display (digits 8 mm high)
- 61-segment bargraph
- Double OFF position
- No-contact voltage detection (NCV)
- VLow Zlow-impedance voltage measurement to avoid stray voltages.
- Min, MAX and RELative functions
- Measurement up to 600 V
- AC or DC current measurement up to 10 A
- Frequency measurement
- Temperature measurement
- Capacitance measurement
- 60 mV range
- Compact IP54 casing with built-in shockproof protection
- Compatible with the multi-function mounting accessory
SKU: n/a -
Digital Multimeters, Electrical, Universal Testing and Safety
C.A 5273
Description
The C.A 5273 is a comprehensive multimeter for electrical maintenance of installations and small AC and DC machines, with a double 6,000-count backlit display and a 61 2-segment bargraph with remanent effect.
Its 600V CAT IV safety is backed by IP54 ingress protection.
Designed and manufactured in France by CHAUVIN ARNOUX, this multimeter comes with a 3-year warranty.
- CAT IV 600V / CAT III 1,000V
- TRMS measurements
- Bi-mode double 6,000-count backlit display and 61 2-segment bargraph (full scale / central zero)
- Auto AC/DC selection
- Automatic or manual range selection
- VLowZlow-impedance voltage measurement with low-pass filter
- 1,000 V
- 10 A
- Resistance / audible continuity
- Temperature
- Capacitance
- Max / Min storage
- 3-year warranty
SKU: n/a -
Digital Multimeters, Electrical, Universal Testing and Safety
C.A 703
With its compact design and built-in test probes, you can take the C.A 703 with you everywhere you go.
AC and DC voltages: 200 mV to 600 V
Current: 200 µA to 200 mA
Resistance: 200 OHM to 20 MOHM
Continuity test (buzzer) and diode test
Safety: IEC 61010 – 600 V CAT IV / 1000 V CAT IIISKU: n/a -
Digital Multimeters, Electrical, Universal Testing and Safety
CA.5003
Description
The C.A 5003 is a very competitively-priced analogue multimeter designed to meet all the needs of electricians.
Specifications:
- DC voltage: 100 mV to 600 V (8 ranges)
- AC voltage: 10 V to 600 V (5 ranges)
- DC current: 50 µA to 15 A (7 ranges)
- AC current: 1.5 mA to 15 A (5 ranges)
- Automatic calibration
- “Voltest” LED if voltage present in ohmmeter mode
- Typical accuracy: 1.5%
- Impedance: 20 kΩ/V
- Resistance: 10 kΩ and 1 MΩ
- Audible continuity test: R < 50 Ω
- dB scale (AC voltages)
- Fuse status LED
- Dimensions: 160 x 105 x 56 mm
- Weight: 500 g
- IP53
- Use on any installation rated lower than or equal to CAT III 600 V as per IEC/EN 61010-1 Edition 2
SKU: n/a -
Digital Multimeters, Electrical, Universal Testing and Safety
CA.5005
Description
The C.A 5005 is a very competitively-priced analogue multimeter designed to meet all the needs of electricians. It is delivered with a current clamp allowing measurement (with direct readings) of AC currents up to 200 A AC.
Specifications:
- DC voltage: 100 mV to 600 V (8 ranges)
- AC voltage: 10 V to 600 V (5 ranges)
- DC current: 50 µA to 10 A (6 ranges)
- AC current: 3 A to 240 A (5 ranges) with MN89 clamp supplied
- Automatic calibration
- “Voltest” LED if voltage present in ohmmeter mode
- Typical accuracy: 1.5%
- Impedance: 20 kΩ/V
- Resistance: 10 kΩ and 1 MΩ
- Audible continuity test: R < 50 Ω
- dB scale (AC voltages)
- Fuse status LED
- Dimensions: 160 x 105 x 56 mm
- Weight: 500 g
- IP53
- Use on any installation rated lower than or equal to CAT III 600 V as per IEC/EN 61010-1 Edition 2
SKU: n/a -
Digital Multimeters, Electrical, Universal Testing and Safety
CA.5011
Description
The C.A 5011 TRMS multimeter gives the RMS value whatever the type of signal (sinusoidal or distorted). This makes it ideal for all types of installations, even those involving “non-linear” loads.
Specifications:
- Automatic recognition of AC/DC
- AC/DC voltage: 400 mV to 600 V (5 ranges)
- Operating frequency: 20 Hz to 10 kHz
- Typical accuracy: 0.5% – Impedance: 10 MΩ
- AC/DC current: 400 µA to 10 A (6 ranges)
- Resistance: 400 Ω to 40M Ω (6 ranges)
- Continuity test: (R < 400 Ω) and diode test
- Frequency: 4 kHz to 400 kHz (3 ranges)
- Reading of dB scale from -20 to 16 dB
- Fuse status LED
- “Voltest” LED if a voltage is present in ohmmeter and continuity modes
- Max and Hold functions
- Can be used as a zero galvanometer
- Backlighting
- Dimensions: 160 x 105 x 56 mm
- Weight: 500g
- Use on any installation rated lower than or equal to CAT III 600 V as per IEC/EN 61010-1 Edition 2
SKU: n/a -
Digital Multimeters, Electrical, Universal Testing and Safety
CA.5275
The C.A 5275 multimeter is equipped with a double 6,000-count backlit display and a 61 2-segment bar graph with remanent effect.
Its 600V CAT IV safety is backed by IP54 ingress protection.
Its very wide measurement ranges allow measurements up to 1,000 V, 10 A, 60 MΩ and 60 mF with resolutions of 10 μV, 1 μA, 100 mΩ, and 1 pF.
SKU: n/a -
Digital Multimeters, Electrical, Universal Testing and Safety
CA.702
Description
With its compact design and built-in test probes, you can take the C.A 702 with you everywhere you go.
AC and DC voltages: 200 mV to 600 V
Resistance: 200 OHM to 20 MOHM
Continuity test (buzzer) and diode test
Safety: IEC 61010 – 600V CAT IV / 1000V CAT III
SKU: n/a
